Acer Aspire 5750, 5750G - WLAN (Wireless Local Area Network) Module Removal; WLAN Module Installation

Machine Maintenance Procedures 3-21
WLAN (Wireless Local Area Network) Module Removal 0
Prerequisite:
Base Door Removal
1. Locate module (B) on lower cover. Refer to Figure 3-12.
2. Disconnect main (B) and auxiliary (C) antenna cables from module (Figure 3-17).
Figure 3-17. WLAN Module
NOTE:
NOTE:
Main (black) antenna connector is close to front of computer. Auxiliary (white) antenna
connector is close to ODD module.
3. Remove screw (A) from mainboard.
4. Remove module from mainboard connector (D).
WLAN Module Installation 0
1. Connect module to mainboard connector (D) (Figure 3-17).
2. Install and secure screw (A) to mainboard.
3. Install main (B) and auxiliary (C) antenna cables on WLAN module connectors.
4. Install base door.
Size Quantity Screw Type
M2.0x3.0 1
B
A
C
D
SG_JE50_HR.book Page 21 Thursday, December 23, 2010 3:47 PM