System Utilities 2-23
Input: 0
dmitools /wu
Write Asset Tag to EEPROM
Input:
0
dmitools /wa Acer Asstag
For examples two (2) through five (5), restart the system to write any changes in the data
to the EEPROM
.
Using the LAN MAC EEPROM Utility 0
1. Extract and copy the contents of LAN MAC Tools.zip to a bootable USB HDD device.
2. Use a text editor to edit MACADDR.TXT with the correct MAC address.
3. Insert USB HDD and boot device.
4. Enter LAN MAC Tools folder.
5. At DOS prompt, enter JE50.BAT to write MAC values to eeprom.
6. Reboot computer when process has completed.
SG_JE50_HR.book Page 23 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
