Machine Maintenance Procedures 3-13
3G Module Installation 0
1. Insert module into mainboard connector (D). Refer to Figure 3-9.
2. Install and secure screw (A) to mainboard.
3. Install main (B) and auxiliary (C) antenna cables on 3G module.
4. Install 3G module door (B). Refer to Figure 3-6.
5. Secure captive screw (A). Refer to Figure 3-8.
6. Install battery pack.
Size Quantity Screw Type
M2.0x3.0 1
SG_JE50_HR.book Page 13 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
