2-18 System Utilities
Remove HDD/BIOS Password Utilities 0
This section provides details about removing HDD/BIOS passwords.
Remove HDD Password as follows:
If the HDD password is incorrectly entered three times, the Password
Error Status dialog shown. (Figure 2-18)
Figure 2-18. Password Error Status
To reset the HDD password, perform the following:
1. Press Enter to continue. The Select Item dialog is shown. (Figure 2-19)
Figure 2-19. Select Item
2. Use the and keys to highlight Enter Unlock Password and press Enter. The
Enter Unlock Password dialog box appears. (Figure 2-20)
Figure 2-20. Enter Unlock Password
A key code is generated for use with unlocking utility. Make note of this code.
3. On separate, compatible device, boot to DOS.
4. Execute UnlockHD.exe (Figure 2-21) to create a password unlock code. Use the format
SG_JE50_HR.book Page 18 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
