Acer Aspire 5750, 5750G - CCD (Charge-Coupled Device) Module Removal; CCD Module Installation

3-52 Machine Maintenance Procedures
CCD (Charge-Coupled Device) Module Removal 0
Prerequisite:
LCD Bezel Removal
1. Locate CCD module (A) on LCD module cover (Figure 3-53).
Figure 3-53. LCD Module Overview without Bezel
2. Remove module cable (G) from module connector (F) as shown in Figure 3-54.
Figure 3-54. CCD Module Removal
3. Remove module (H) from adhesive strip on LCD cover.
CCD Module Installation 0
1. Install and secure module (H) to LCD module cover (Figure 3-54).
2. Install module cable (G) to module connector (F).
3. Install LCD Bezel.
A
B
C
C
C
C
D
E
F
G
H
SG_JE50_HR.book Page 52 Thursday, December 23, 2010 3:47 PM