Acer Aspire 5750, 5750G - 3 G Module Removal

3-12 Machine Maintenance Procedures
3G Module Removal 0
Prerequisite:
Battery Pack Removal
1. Locate module door (B) on lower cover. Refer to Figure 3-6.
2. Loosen captive screw (A) (Figure 3-8).
Figure 3-8. 3G Module Cover Door
3. Remove door from lower cover.
4. Disconnect main (B) and auxiliary (C) antenna cables from module (Figure 3-9).
Figure 3-9. 3G Module with Antenna Cables
NOTE:
NOTE:
Main (yellow) antenna connector is close to battery bay. Auxiliary (blue) antenna
connector is close to ODD module.
5. Remove screw (A) from mainboard.
6. Remove module from mainboard connector (D).
A
A
B
C
D
SG_JE50_HR.book Page 12 Thursday, December 23, 2010 3:47 PM