3-42 Machine Maintenance Procedures
CPU Removal 0
Prerequisite:
Thermal Module Removal
1. Locate module (A) on mainboard (Figure 3-41).
Figure 3-41. CPU in Socket
2. Turn captive screw (B) left 180º to release module.
3. Remove module from socket.
CPU Installation 0
1. Align CPU marker (C) with socket marker (D) and install CPU in socket (Figure 3-41).
2. Turn screw (B) right 180º to secure module.
3. Install thermal module.
SG_JE50_HR.book Page 42 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
