3-20 Machine Maintenance Procedures
ODD Module Installation 0
1. Install bezel (C) to module. Refer to Figure 3-16.
2. Install bracket (B) to module.
3. Install and secure two (2) screws (A).
4. Install module (D) in lower cover. Refer to Figure 3-12.
5. Install and secure screw (A) to lower cover.
6. Install HDD module.
Size Quantity Screw Type
M2.5x8.0 1
M2.0x3.0 2
SG_JE50_HR.book Page 20 Thursday, December 23, 2010 3:47 PM
To Next Page
Loading...
