Machine Maintenance Procedures 3-19
3. Remove screws (C) from ODD (Optical Disc Drive) module and bracket (D) (Figure 3-16).
Figure 3-16. ODD Module
4. Remove bracket (D) from module.
5. Insert a narrow tool into the hole (E) on bezel, to eject module from tray (Figure 3-17).
6. Press on latch (F) to unlock bezel (G) from module.
Figure 3-17. ODD Bezel Removal
7. Remove bezel from module.
SG_JV51_HR.book Page 19 Friday, July 8, 2011 5:58 PM
To Next Page
Loading...
