ADCMT 6156 - Page 256

6146/6156 DC Voltage/Current Generators Operation Manual
Alphabetical Index
I-2
Initializing the Setting Conditions .......... 2-26
Interface Signals ..................................... 5-15
INTERLOCK/OPERATE IN/OUT ........ 4-25
Internal Processing Time (Typical Value) A-8
[L]
L.ONLY .................................................. 3-7
Life Limited Parts ................................... 1-12
LIMIT Key
(Voltage and Current Limiter Setting) .... 3-2
Limiter .................................................... 4-17
Limiter Setting Ranges ........................... 4-17
LMT.BZ .................................................. 3-8
LMT.HL .................................................. 3-3
LOAD ..................................................... 3-7
Load Connection ..................................... 4-1
Loading Data in Nonvolatile Memory to
Volatile Memory ..................................... 2-40
Loading Parameters ................................ 2-60
[M]
M.CLR .................................................... 3-4
M.LOAD ................................................. 3-4
M.SAVE ................................................. 3-4
Manual Calibration Explanatory Diagram 7-16
Manual Calibration Procedure ................ 7-13
Measuring Instrument and
Cables Necessary for Calibration ........... 7-1
Measuring Instruments Necessary for
Performance Test .................................... 6-1
MEM ....................................................... 3-4
MEM Key (Memory Setting) ................. 3-2
Memory Recall Mode ............................. 2-36
Memory Setting ...................................... 2-36
Menu Index ............................................. 3-1
MENU Key (Parameter Setting) ............. 3-2
Menu Operation ...................................... 2-20
Menu Structure and Parameter Setting ... 2-23
[N]
Note for Output Terminals ...................... 4-1
NTC.BZ .................................................. 3-8
[O]
OP.I/O ..................................................... 3-5
Operate/Standby/Suspend ....................... 4-12
Operating Check ..................................... 1-9
Operating Environment ........................... 1-4
Operating Multiple 6146/6156 ................ 4-27
OPERATION .......................................... 2-1
Operational Principles ............................. 4-36
Operations in DC Source Mode .............. 4-4
Operations in Memory Recall Mode ...... 4-6
Operations in Sweep Source Mode ......... 4-9
Operations Using Continuous Function .. 4-5
OPR.HD .................................................. 3-4
OPR/SUSPEND Key (Operate/Suspend) 3-9
Optional Accessories .............................. 1-3
Options .................................................... 1-3
Other Keys .............................................. 2-5
Outlined Calibration Procedure .............. 7-5
OUTPUT CONTROL Section ................ 2-3
Output Section ........................................ 2-6
[P]
P.LOCK .................................................. 3-8
P/KEY ..................................................... 3-8
Panel Description .................................... 2-1
Panel Lock .............................................. 2-62
Parallel Connection ................................. 4-30
PARAM .................................................. 3-6, 3-7
PERFORMANCE TEST ........................ 6-1
POL ......................................................... 3-3
POLARITY 0 Key
(Source Value Polarity and Zero) ........... 3-9
Polarity Change and Zero ....................... 4-12
POLARITY- Key
(Source Value Polarity and Zero) ........... 3-9
POLARITY Section ................................ 2-3
Polarity Setting Mode (Unipolar/Bipolar) 2-30
POLARITY+ Key
(Source Value Polarity and Zero) ........... 3-9
PON.LD .................................................. 3-6
Power Cable ............................................ 1-8
Power Specification ................................ 1-6
POWER Switch ...................................... 2-6
Precautions when Using GPIB ............... 5-9
Precautions when Using USB ................. 5-13
PREFACE ............................................... 1-1
Preparation for Calibration ..................... 7-1
Preventing Oscillation Due to
Inductive Load ........................................ 4-3
PRGM MODE Key
(Switching to and Releasing Memory
Recall/Sweep Source) ............................. 3-9
Product Disposal and Recycling ............. 1-13
Product Overview ................................... 1-1
Program Example 1-DC Voltage Source and
Voltage/Current Measurement ................ 5-48