aditec MIC 3000 - Page 8

User Manual MIC 900 / MIC 1100 / MIC 3000
8
Issue 17.08.2021_00
Air circulation level
Short-cut button for changing the circulation level on a
multi-level motor (if it has been configured that way)
LED shines – air circulation level 1 is active (low)
LED flashes slowly – air circulation level 2 is active
(intermediate)
LED flashes quickly – air circulation level 3 is active
(high)
(only MIC 3000)
Delta
Short-cut button for entering the Delta value
Humidity min
Short-cut button entering the nominal humidity value, min
LED shines – humidification is active
MIC 3000
MIC 1100
Program number
Program number entry
Step
Switching into the next step, selecting a step
Line
Confirming an entry and highlighting the next object.
Test mode
(only MIC 3000)
Calling up test mode / Changing the key board mode
(numbers / capital letters/ lower case letters)
LED off – number
LED shines – lower case letters
LED flashes – capital letters
...
Numerical pad
Number or signs entry
(only MIC 3000)
Plus/Minus
Switching from positive to negative values
(only MIC 3000)
Manual program
Button is without function at the moment
Please note
Short-cut buttons allow you to access specific nominal values directly (and actual values during
operation) in order to check or change values.