Chapter 1. Introduction
1-2 MX2800 User Manual 61200290L1-1
The major features of the MX2800 are as follows:
• Built-in 1:1 redundancy
• Hot-swappable controller cards
• Independent, dual-load sharing, redundant power supplies
• Embedded SNMP and Telnet management through 10BaseT
ethernet or SLIP/PPP dialup
• Detailed performance monitoring for local and remote units
• Simplified configuration through the VT 100 terminal menu
structure
• Integrated V.34 modem for dial-up and dial-out access (see the
following note)
• Capable of backhauling multiple service types (T1/E1)
• AC or DC power
• External DS3 clock option
• M13 and C-bit signaling support
• NEBS Level 3 compliant
• Standard 10-year warranty
Controller Card 1:1 Redundancy
The MX2800 supports two hot-swappable controller cards which
provide 1:1 redundancy for the T1 and T3 signals as well as the T3
connections. With two cards installed, the MX2800 can recover
from circuit or network failure, depending on the configuration.
See Circuit and Network Redundancy on page 7-1 for more
information.
Information regarding the built-in modem applies to the following list of
part numbers: 4200290L1, L2, L3, and L4.
To Next Page
Loading...
