ADTRAN MX2800 - SNMP Management Options; Trap IP Addresses; Trap Generation; Figure 3-15. Trap Generation Menu

Chapter 3. Configuration
61200290L1-1 MX2800 User Manual 3-19
SNMP Management Options
Trap IP Addresses
Enter up to five IP addresses of SNMP managers to which the
MX2800 sends traps.
Trap Generation
Use this menu (see Figure 3-15) to designate which error conditions
will cause the unit to send trap messages.
Figure 3-15. Trap Generation Menu
Controller Traps
Trap If enabled, the unit issues a trap when...
Protection
Switch
the controller cards switch.
Card Removed a controller card has been removed.
Card Failure a controller card has failed.
Communica-
tion Fail
the controller cards can no longer communi-
cate with each other.
Max Switches the
M
AX
S
WITCH
T
HRESHOLD
is reached. See
page 3-5.