16
2.12 TRANSMISSION LUBRICATION
Transmission fluid needs to be changed every
400 km.
There is a gear oil drain hole bolt at the rear of
the engine.
(STEP1)
Place a drain pan beneath oil pan and remove
drain plug from the crankcase. Allow oil to
drain completely.
(STEP2)
Reinstall the drain plug. Tighten to
specification.
(STEP3)
Add the proper amount of lubricant to bring
level into operating range as shown. Do not
over fill.
(STEP4)
Verify fluid level is correct and no leaks are
present.
To Next Page
Loading...
Need help?
General
