Aeon Cobra 220 User Manual

33
Remove the 4 cylinder head bolts evenly
by loosening each one 1/4 turn at a time
until loose.
Remove the cam chain from the sprocket
by tilting the cam assembly and
simultaneously lifting the chain.
INSPECTION
Inspect the cam lobes surface and height of
cam lobes for wear or damage.
SERVICE LIMIT: IN 29.40 mm
EX 29.16 mm
Inspect the camshaft and bearings for wear or
damage and replace them if necessary.

Aeon Cobra 220 Specifications

General

Brand	Aeon
Model	Cobra 220
Category	Offroad Vehicle
Language	English