Aeon Cobra 220 User Manual

76
8.7 STEERING SYSTEM
Remove wheel nuts and wheel. Remove the
spacer (A) located on the backside of the wheel.
Remove the two brake caliper hex bolts (B) and
the brake caliper.
Remove hub cap (C), cotter pin, front spindle
nut, and washer.
Remove the outer spacer (D) from the spindle.
Inspect outer spacer for wear, replace if needed.
The spacer maybe embedded in the hub.

Aeon Cobra 220 Specifications

General

Brand	Aeon
Model	Cobra 220
Category	Offroad Vehicle
Language	English