Aeon Cobra 220 User Manual

91
10. FENDER AND EXHAUST PIPE
10.1 REAR FENDER REMOVAL
10.2 FRONT FENDER REMOVAL
10.3 EXHAUST PIPE REMOVAL
10.4 EXHAUST PIPE INSTALLATION
10.1 REAR FENDER REMOVAL
Pull the “Seat Release Bar” to take off the seat.
This seat release bar is under the right side of the
rear fender.
Rear Cab: 4 bolts at rear of cab, 8 screws
secure footwell to rear cab (unless removed
previous).
Footwell: 4 screws at bottom of footwell, 4
screws to front cab, 4 screws to rear cab.

Aeon Cobra 220 Specifications

General

Brand	Aeon
Model	Cobra 220
Category	Offroad Vehicle
Language	English