72
Using a line wrench, loosen and remove brake
line (A) to caliper. Place a container under
caliper to catch fluid draining from brake line.
Drain the fluid into the container.
Remove the two brake caliper mounting bolts
(B) and remove the brake caliper.
FRONT CALIPER INSTALL
Install caliper on hub strut, and torque mounting
bolts to 18 ft. lbs. (24 Nm).
Install brake line and tighten securely with a line
wrench.
Torque the caliper slide bolts to 33 ft. lbs. (45
Nm). Torque the banjo line bolt to 15 ft. lbs. (21
Nm).
Install wheels and torque wheel nuts to
specification.
Front Wheel Nut Torque
30 ft. lbs. (41 Nm).
To Next Page
