Aeon Cobra 220 User Manual

32
Remove the rocker shaft locking plate.
Inspect each rocker arm cam follower surface.
If there is any damage or uneven wear, replace
the rocker arm. NOTE: Always inspect
camshaft lobe if rocker arms are worn or
damaged.
Remove each rocker arm shaft using the 10
mm hex bolt that secures the lock plate.
Measure the I.D. of each rocker arm.
SERVICE LIMIT: 10.10 mm
Measure the O.D. of each rocker arm shaft.
SERVICE LIMIT: 9.91 mm

Aeon Cobra 220 Specifications

General

Brand	Aeon
Model	Cobra 220
Category	Offroad Vehicle
Language	English