Aeon Cobra 220 User Manual

67
Remove the caliper bolts (B) and caliper
from the mount bracket.
With pads installed, push caliper piston into
caliper bore slowly using a C-clamp or locking
pliers.
NOTE: Brake fluid will be forced through
compensating port into master cylinder fluid
reservoir when piston is pushed back into
caliper. Remove excess fluid from reservoir as
required.
Remove the c-clips (C) from the end of the
caliper slide bolts.

Aeon Cobra 220 Specifications

General

Brand	Aeon
Model	Cobra 220
Category	Offroad Vehicle
Language	English