Afinia L901 - Page 75

L801LabelPrinter
Troubleshooting 75
2. Fromthecontrolpanel,runNormalprintheadcleaning.
( (
Config ) > MAINTENANCE > CLEAN > Normal )
•Ifprintqualityshowssomeimprovement,repeatNormalcleaninguntiltheprint
qualityissatisfactory.
•Ifprintqualitydoesnotimprove,continuewithstep3.
3. RuntheExtendedcleaningcyclefromthecontrolpanel.
•Ifprintqualityshowssomeimprovement,repeatExtendedcleaninguntilthe
printqualityissatisfactory.
•Ifprintquality
doesnotimprove,continuewithstep4.
4. RuntheExtremecleaningcyclefromthecontrolpanel.
•Ifprintqualityshowssomeimprovement,repeatExtendedcleaninguntilthe
printqualityissatisfactory.
•Ifprintqualitydoesnotimprove,continuewithstep5.
5. Opentheclamshellandinspecttheprinthead.Lightlymoistena
lint‐freeclothwith
de‐ionizedwaterandgentlyblotoffanyink.Donotwipeside‐to‐side,asthismay
mixcolorsfromonenozzleintoothers.Ifnoinkisvisible,gentlywipetheinknozzles
fromonesidetotheother.
6. Changetheprinthead.
ContactTechnicalSupportiftheissuespersist.