Agilent Technologies 1100 Series User Manual

1100 Series DAD and MWD User Manual 151
Maintenance 8
4 If detector main board was replaced, re-enter the serial number
information of the module through the user interface, see “Using the
Control Module G1323B” or “Using the Agilent ChemStation” as described
in the Service Manual.
NOTE
The wavelength recalibration should be performed after at least 10 minutes of warm-up
time of the lamp.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English