Agilent Technologies 1100 Series User Manual

80 1100 Series DAD and MWD User Manual
4Using the Detector
Spectrum Settings
To change the Spectra settings open.
1 To change the Spectra settings select Setup Detector Signals.
2 In the section Spectrum click on the drop-down list.
3 Change the Range, Step width and Threshold according to your needs.
Figure 47 Spectra Window
Ta b l e 1 5 on page 81 shows the
possible parameters.

Agilent Technologies 1100 Series Specifications

General

Brand	Agilent Technologies
Model	1100 Series
Category	Laboratory Equipment
Language	English