Agilent Technologies 1260 Infinity G1315D User Manual

58 Agilent 1260 Infinity DAD and MWD User Manual
3 Installing the Module
Installing Capillaries
5 When using UHP-FF fittings with bioinert capillaries, do not try to remove
fittings from these capillaries. Bio-inert capillaries are using a PEEK front
end, which may expand under pressure especially when being in contact
with some organic solvents. If a fitting is moved across an expanded PEEK
end, there is a risk of damaging the capillary by ripping off its end. Before
re-installing such capillaries, push the ferrule towards the rear site for a
small distance.
Figure 13 Capillary fitting
6WHS
5HDU )URQW

Agilent Technologies 1260 Infinity G1315D Specifications

General

Brand	Agilent Technologies
Model	1260 Infinity G1315D
Category	Laboratory Equipment
Language	English