Agilent Technologies 7820A User Manual

Maintaining the NPD 11
Maintaining Your GC 209
Capillary G1531-80560 0.29 mm
(0.011 inch)
43 mm
High-temperature G1531-80620 0.47 mm
(0.018 inch)
43 mm
Table 33 Jets for adaptable fittings
Jet type Part number Jet tip id Length
Capillary with extended jet
(recommended)
G1534-80590 0.29 mm
(0.11 inch)
70.5 mm
Capillary 19244-80560 0.29 mm
(0.011 inch)
61.5 mm
Capillary, high-temperature 19244-80620 0.47 mm
(0.018 inch)
61.5 mm
Packed 18710-20119 0.46 mm
(0.018 inch)
63.6 mm
Table 32 Jets for capillary optimized fittings (continued)
Jet type Part number Jet tip id Length
Table 34 Nuts, ferrules, and hardware for capillary columns
Column id (mm) Description Typical use Part number/quantity
.530 Ferrule, Vespel/graphite,
0.8-mm id
0.45-mm and 0.53-mm capillary
columns
5062-3512 (10/pk)
Ferrule, graphite, 1.0-mm id 0.53-mm capillary columns 5080-8773 (10/pk)
Ferrule, graphite, 0.8-mm id 0.53-mm capillary columns 500-2118 (10/pk)
Column nut, finger-tight (for
0.53-mm columns)
Connect column to inlet or detector 5020-8293
.320 Ferrule, Vespel/graphite,
0.5-mm id
0.32-mm capillary columns 5062-3514 (10/pk)
Ferrule, graphite, 0.5-mm id 0.1-mm, 0.2-mm, 0.25-mm, and
0.32-mm capillary columns
5080-8853 (10/pk)
Column nut, finger-tight (for
.100- to .320-mm columns)
Connect column to inlet or detector 5020-8292

Agilent Technologies 7820A Specifications

General

Brand	Agilent Technologies
Model	7820A
Category	Laboratory Equipment
Language	English