251
Agilent 7820A Gas Chromatograph
Maintaining Your GC
Agilent Technologies
13
Maintaining the G3435A/G3436A FPD
Consumables and Parts for the FPD 252
Exploded Parts View of the FPD 254
To Install a Capillary Column Adapter in the FPD 255
To Attach a Capillary Column to the FPD 257
To Change the FPD Wavelength Filter 259
To Remove the FPD Vent Tube 262
To Replace the FPD Ignitor 264
To Install the FPD Vent Tube and Cover 266
This section describes how to maintain the Agilent
G3435A/G3436A Single or Dual Flame Photometric detector. To
determine the FPD version, lift the detector top cover and
locate the metal FPD cover (see “Exploded Parts View of the
FPD” on page 254). If the cover is solid, the FPD is a G3435A or
G3436A. Refer to the maintenance procedures in this section. If
the cover is perforated (has round vent holes), the detector is an
FPD
+
(see “Maintaining the FPD
+”
on page 233).
To Next Page
Loading...
Need help?
General
