4 Maintaining Your GC
5 Maintaining the Purged Packed Inlet
Consumables and Parts for the Purged Packed Inlet 60
Exploded Parts View of the Purged Packed Inlet 63
To Install a Capillary Column with the Purged Packed Inlet 64
To Change the Septum on the Purged Packed Inlet 68
To Clean the Septum Seat in the Purged Packed Inlet 70
To Install an Adapter on the Purged Packed Inlet 72
To Change the O-Ring on the Purged Packed Inlet 74
To Change the Glass Liner on the Purged Packed Inlet 75
To Install an Insulation Cup on the Purged Packed Inlet 77
To Clean the Purged Packed Inlet 78
To Bakeout Contaminants from the Purged Packed Inlet 80
To Install a Packed Metal Column 81
To Install a Packed Column Adapter on a Detector Fitting 83
To Install a Packed Glass Column 85
To Condition a Packed Column 88
To Install Ferrules on a Packed Metal Column 90
6 Maintaining the Packed Column Inlet
Consumables and Parts for the Packed Column Inlet 92
Exploded Parts View of the Packed Column Inlet 94
To Change the Septum on the Packed Column Inlet 95
To Clean the Septum Seat in the Packed Column Inlet 97
To Install an Adapter on the Packed Column Inlet 99
To Change the O-Ring on the Packed Column Inlet 101
To Change the Glass Liner on the Packed Column Inlet 102
To Install an Insulation Cup on the Packed Column Inlet 104
To Clean the Packed Column Inlet 105
To Bakeout Contaminants from the Packed Column Inlet 107
To Install a Packed Metal Column 108
To Install a Packed Column Adapter on a Detector Fitting 110
To Install a Packed Glass Column 112
To Condition a Packed Column 115
To Install Ferrules on a Packed Metal Column 117
To Next Page
Loading...
Need help?
General
