8-49
Performance Tests
Power Level Accuracy Performance Test (Automated)
Power Level Accuracy Performance Test (Automated)
NOTE This performance test is the preferred replacement for the RF Level Accuracy
performance test. If this performance test is performed, the RF level Accuracy
performance test is not required.
Description
The power level accuracy performance test measures the level of the output power against
the specifications
Required Test Equipment
• Power meter
• Power Sensor
•Spectrum Analyzer
• 6 dB Attenuator
• Low Frequency Amplifier
• High Frequency Amplifier
Procedure
Figure 8-23 HF Power Level Accuracy Test Setup (Power Levels > −10 dBm)
To Next Page
Loading...
