8-3
Performance Tests
Required Test Equipment
Required Test Equipment
• 8903B Option 051 Audio Analyzer
— Distortion accuracy: ±1 dB
— Residual distortion: −80 dB at 80 kHz BW
— 30 kHz low-pass filter
— AC level accuracy: ±4%
— CCITT weighting filter
• 8902A Measuring Receiver
— FM accuracy: ±2% of reading ±1 digit
— AM accuracy: ±2% of reading ±1 digit
— Range: 150 kHz to 1300 MHz
— Filter: 300 Hz high-pass
— Filter: 15 kHz low-pass
— Detectors Peak+
• 8563E RF Spectrum Analyzer
— Frequency range 1 MHz to 4000 MHz
— Relative level accuracy: ±2 dB
(harmonic and spurious measurements)
— 100 Hz digital resolution BW filter (required for power accuracy)
— Displayed average noise:
100 kHz: −110 dBm
1 MHz to 10 MHz: −130 dBm
10 MHz to 4 BHz: −134 dBm
— RF input VSWR: 1:1.5
— External timebase input
• 8663A Synthesized Signal Generator
— Frequency range: 11.5 MHz to 2500 MHz
— Output level: ±4 Hz at 4000 MHz
— Meets 8663A single-sideband phase noise specifications
To Next Page
Loading...
Need help?
General
