Agilent Technologies 8648A

8-23
Performance Tests
Phase Modulation Distortion Performance Test
Configure the Synthesized Signal Generator
1. Amplitude +16 dBm
2. Frequency CW (LO frequencies on test record)
3. Modulation off
Measure Deviations
1. Enter the frequencies and deviations shown in the test record.
2. Record the test results and compare the results to the limits in the test record.
Test Record
• 8648B: Table 8-32.
• 8648C: Table 8-57.
• 8648D: Table 8-82.