1b-38
Operation Reference
Function
GPIB
1. ADRS
Press
ADRS to view the instrument’s GPIB address setting in the second line of the
FREQUENCY display.
To change the address, press
ADRS and a two-digit number. For example, enter 01 to set
the address to 1.
Acceptable HP-IB addresses are 00 through 30.
2. LOCAL
Press
LOCAL to return to front-panel operation when the instrument has been set for
remote operation. The SEQ and REG fields will replace the HP-IB status indications in the
second line of the FREQUENCY display when the instrument is returned to local
operation.
To Next Page
Loading...
Need help?
General
