1b-34
Operation Reference
Function
Instrument Preset
POWER ⇐
Turn the instrument on while pressing the backspace key (⇐)to perform an instrument
preset. The instrument will power up to factory-defined settings shown in the following
table. Save and recall registers are not affected by this operation.
POWER DEL
Turn the instrument on while pressing the memory DEL key to perform a clear memory.
This function erases all save/recall registers, sets the GPIB address to 19, and performs an
instrument preset where the instrument powers up to factory-defined settings shown in
the following table.
NOTE This will cause an error message to appear on the display: 627 Battery RAM
failure: memory lost. This is normal.
To Next Page
Loading...
