Agilent Technologies Triple Quadrupole LC/MS User Manual

5 Maintenance
Installing and removing sources
127 Agilent Triple Quadrupole LC/MS System User Guide
• Put the system in Standby mode.
NOTE
In the tune view or context, turn down the gas temperature as low as possible.
Leave the gas flow on for 30 minutes to cool the source.
Once complete, proceed to the desired source removal and installation
instructions.

Agilent Technologies Triple Quadrupole LC/MS Specifications

General

Brand	Agilent Technologies
Model	Triple Quadrupole LC/MS
Category	Laboratory Equipment
Language	English