Agilent Technologies Triple Quadrupole LC/MS User Manual

4 Basic Operation
Setting Up and Running a Worklist
Agilent Triple Quadrupole LC/MS System User Guide 82
4 On the Sample Position tab, specify the sample vial locations (make sure that
the specific sample tray type has been configured by right-clicking the
autosampler device image).
5 Specify the locations, and click OK.
6 To set up the worklist run, click Worklist Run Parameters .

Agilent Technologies Triple Quadrupole LC/MS Specifications

General

Brand	Agilent Technologies
Model	Triple Quadrupole LC/MS
Category	Laboratory Equipment
Language	English