Airtec RO Plus l - 4 Datasheet; General Requirements

15
4. Datasheet
Power supply: Carried out to meet local regulations
Terminated in an approved lockable supply separator
Example:
See product requirements in datasheet
HydroSens systems include a Frequency inverter
Example: Safety relay AC/DC type B
Room temperature: See datasheet and order conrmation
Water supply: Standard 3/4” internal tread See datasheet and order conrmation
Pressure range See datasheets full load min/max
Supply minimum requirements at full load
Note the pressure loss in lter / softener ect.
See water report to determent the quality
See water requirement datasheet
Floor drain: • Installation-/technic room must have oor drain to
ensure unintended water leakage will lead to drain
• Carried out to meet local regulations
Example:
Free workspace around all units:
AHU:
Spray chamber: Water proof
Corrosion resistant
Inspection / service door with window
light
Access to pads from both side
Floor drain
Floor leveling towards drain
Insure safe distance to absorbent material
Material: Non absorbent
Must not provide nutrients for microorganism
Supply air: Laminated / smoothen
Always check order conrmation for non standard agreements
4.1 General requirements
201218