108
REPLACEMENT OF MAIN COMPONENTS
6. Disconnect the air intake hose, the fuel gas hose and
the oil hose from the engine.
7. Disconnect the blow-by hose.
8. Pull the caps to remove the cables (4 places).
9. Remove the spark plugs with a plug wrench.
(4 places)
10. Remove the surrounding parts of cylinder head.
1) Unscrew 2 bolts and 2 nuts. Remove the igniter and
4 ignition coils with the bracket.
Fuel gas hose
Air intake hose
Oil hose
Blow-by hose
Caps
Spark plugs
(4 places)
(4 places)
Bracket
Bolts
Nuts
To Next Page
Loading...