EasyManuals Logo

AISIN SEIKI E1 Series User Manual

Default Icon
317 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
43
PERIODIC INSPECTION
3. Tighten the oil filter by hand until the gasket comes
into contact with the bracket.
4. Further tighten the filter by 3/4 turns with the oil filter
wrench.
NOTE) Even if the oil filter says "Tighten hard with your
hands", be sure not to tighten it by 3/4 or more
turns with an oil filter wrench. There is a possi-
bility that it will not come off.
3) Spark Plug Replacement
1. Pull the caps to remove the cables.
NOTE) Do not pull the cable.
2. Remove the spark plugs with a plug wrench.
3. Tighten the new spark plug by hand.
4. Further tighten the spark plug with a torque wrench.
5. Fit the cap onto the plug until it makes a clicking
sound.
4) Air Filter Element Replacement
1. Move a clamp to remove the air intake hose.
Bracket
Oil filter
Replacement interval Every 3 years (10,000 hours)
Cap
Plug wrench
Tightening torque 15 ~ 22 lb·ft (20 ~ 30 N·m)
Replacement interval Every 3 years (10,000 hours)
Clamp
Air filter
Air intake hose

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AISIN SEIKI E1 Series and is the answer not in the manual?

AISIN SEIKI E1 Series Specifications

General IconGeneral
BrandAISIN SEIKI
ModelE1 Series
CategoryAir Conditioner
LanguageEnglish