110
REPLACEMENT OF MAIN COMPONENTS
7) Unscrew 3 bolts to remove the cylinder head cover.
11. Remove the cylinder head.
1) Loosen the bolts and nuts evenly in several rounds
in the order shown right, and remove the rocker
shaft assembly.
2) Remove the push rods.
NOTE) Place the push rods in the order they are
removed.
3) Loosen 13 bolts evenly in the order shown right
in several rounds, and remove the cylinder head.
NOTE) Take care not to damage the mounting
surface of the cylinder head.
Bolts
Cylinder head cover
FRONT side
To Next Page
Loading...