263
TROUBLESHOOTING
(Continued)
20
Actuators
output
status/
individual
actuating
Check mode
Conducts single forced actuator operation.
※ To drive the starter, turn ON " ① Main side output permission", " ② Engine side output permis-
sion", and " ③ Starter transformer" in order. Then turn ON " ⑥ Starter".
※ To drive the starter, turn ON " ① Main side output permission", " ② Engine side output permis-
sion" Then turn ON " ④⑤ Electromagnetic gas valve".
Example) Method of forced activation of starter setting
Select command (Initial display) Displays output status of the designated number
↓
Press the [INDOOR UNIT] switch 5 times
Select command Select starter
↓
Press [SET] switch
During command setting
→
←
ON/OFF changes with [UP] or [DOWN] switch
↓
Press [SET] switch
↓
Press [SET] switch
Return to select command (setting is completed)
Forced activation of starter setting Completed
Starter output is OFF. Starter output is ON.
※ Forced setting is automatically cancelled in 3 minutes. (Starter is cancelled in 5 seconds)
Code No. /
functions
Operational procedure / display contents
To Next Page
Loading...