287
TROUBLESHOOTING
Code No. /
functions
Operational procedure / display contents
d9
Air net
address
number
Monitor mode
Displays air net address number.
When air net address is 105
Check mode
Programs forced setting of air net address number.
(Setting range of air net address number is 0 ~ 63.)
Method of air net address number setting
Select command (Initial display)
When the address is not set In the case of address change "49 → 22"
↓
Press [SET] switch
↓
Press [SET] switch
During command setting
Automatic setting Forced setting
→
←
Switch by pressing [UP] + [DOWN] switches simultaneously for 1 second
↓
Change the flashing digit data
with [UP] or [DOWN] switch.
Switch by pressing [UP] +
[DOWN] switches simulta-
neously for 1 second
↓
Press [SET] switch (Flashing
digit moves to the right)
↓
Change the flashing digit data
with [UP] or [DOWN] switch.
(with digit up/down)
↓
Press [SET] switch
(all digits start flashing)
↓
Press [SET] switch
↓
Press [SET] switch
Return to select command (setting is completed) Air net address setting Completed
Address clear is completed. Address setting is completed.
To Next Page
Loading...