289
TROUBLESHOOTING
Code No. /
functions
Operational procedure / display contents
E0
Switching
of indoor
unit num-
ber display
Monitor mode
Shows current method of indoor unit number display.
When indoor unit number is displayed by air net address
Method of indoor unit number display
Air : Air net address
cnt : Order of indoor unit registration
Command mode
Switches the method of indoor unit number display.
Method of indoor unit number display setting
Select command (Initial display)
In the case of method of indoor unit number
display change "By air net address → By the
order of indoor unit registration"
In the case of method of indoor unit number
display change "By the order of indoor unit
registration → By air net address"
↓
Press [SET] switch
↓
Press [SET] switch
Select command
→
←
ON/OFF changes with [UP] or [DOWN] switch
↓
Press [SET] switch
↓
Press [SET] switch
Return to select command (setting is completed)
Method of indoor unit number display setting Completed
Setting for display by the order of indoor unit
registration is completed.
Setting for display by air net address is completed.
To Next Page
Loading...