60
PERIODIC INSPECTION
6. Unscrew 2 bolts to remove the rear side engine
mount.
7. Set the new engine mount with spacer to the base
plate and tighten with 2 bolts.
8. Mount the rear side engine bracket and tighten
4 bolts.
9. Unscrew 4 bolts of front side engine bracket.
10. Unscrew 2 bolts to remove the front side engine
mount.
11. Set the new engine mount with spacer to the base
plate and tighten with 2 bolts.
Bolts
Rear side
Engine mount
Tightening torque 31.0 lb·ft (42.0 N·m)
Bolts
Rear side
(4 pieces)
Tightening torque 14.8 lb·ft (20.0 N·m)
Front side
Bolts
(4 pieces)
Front side
Bolts
Engine mount
Tightening torque 31.0 lb·ft (42.0 N·m)
To Next Page
Loading...
Need help?
General