64
REPLACEMENT OF MAIN COMPONENTS
Necessary tools
Belt tension gauge
Setting for sonic belt tension gauge
Compressor belts
Tools Purpose
Torque wrench Tightening with required torque
Hose clipper Clipping hoses
Wooden
block
Thickness: approximately 1-1/2 inch (40 mm),
length: 24 inch (600 mm) or longer, 2 pieces
Engine Replacement (8 TON)
Thickness: approximately 3 inch (80 mm),
length: 24 inch (600 mm) or longer, 1 piece
Thickness: approximately 2 inch (55 mm),
length: 24 inch (600 mm) or longer, 1 piece
Engine Replacement (15 TON)
Thickness: approximately 4-1/2 inch (115 mm),
length: 24 inch (600 mm) or longer, 2 pieces
Gasket remover
Scraper
Phillips-head screwdriver
Oil filter wrench Replacing the oil filter
Plug wrench Replacing the spark plug
Hook Removing the fuel gas hose
Cylinder head replacement tool (SST)
Replacing the cylinder head
(09270-71010: Toyota Part No.)
Diagonal cutting pliers Cutting the bundling bands
Vacuum pump Replacing the compressor
Scale Replacing the compressor
Gas leak detector liquid
Checking the fuel gas leakage /
removing the fuel gas hose
Manifold gauge Replacing the compressor
Mechanical belt tension gauge Measuring the belt tension
Sonic belt tension gauge Measuring the belt tension
Digital thermometer Replacing the compressor
Table approximately 4 inch (100 mm) high Replacing the compressor
Saucers Containing removed bolts
Rag Preventing blot and cleaning around the unit
Mechanical Measures belt tension with spring tension
Sonic Measures belt tension by detecting sound wave generated by the belt
Setting items 8 TON 15 TON
Unit mass 17 g / rib·m
Number of ribs 8 pieces
Span 212 mm 242 mm
To Next Page
Loading...