80
REPLACEMENT OF MAIN COMPONENTS
3) Mount 2 oil trays and tighten 2 bolts.
13. Mount the engine coolant pump.
1) Mount the engine coolant pump and tighten 2 bolts.
2) Mount the cover and tighten 2 bolts.
3) Connect the 2 engine coolant hoses at the outlet
and inlet ports of the engine coolant pump to the
engine coolant pump.
14. Connect the 3 oil hoses to the engine.
15. Check that all the hoses are securely fixed.
16. Remove all the hose clippers clamping the hoses.
Bolts
Tightening torque
2.2 ± 0.7 lb·ft
(3.0 ± 0.9 N·m)
Bolts
Tightening torque
3.7 ± 1.1 lb·ft
(5.0 ± 1.5 N·m)
Bolts
Tightening torque
3.7 ± 1.1 lb·ft
(5.0 ± 1.5 N·m)
Engine coolant hoses
Oil hose
Sub oil reservoir
Oil hoses
To Next Page
Loading...