167
Pitch Shift
This process changes the pitch of the sample without changing its
length. This lets you set the sample’s pitch to your sequence
without affecting the sample’s tempo or duration. You can adjust it
up to 12 semitones, up or down. Keep in mind that the audio
quality may decrease at more extreme settings.
Gain Change
This process raises or lowers the volume of the sample. You can
adjust it up to 18 dB, higher or lower. This function is different than
Normalize because it will allow volumes beyond clipping level. This
may be a desired effect, but remember to watch your output level!
To Next Page
Loading...
