186
Pad Mute
You can mute or unmute individual sounds (on a single track) in real time by pressing the pads. This is
useful if you want to hear a track without a particular sound or if you want to isolate specific sounds or
combinations of sounds.
Tip: This function is similar to, but probably more convenient than, muting pads one at a time in the grid.
Pad Mute.
To mute pads in this mode:
1. If the Pad Mute tab in the lower-left corner is not already selected, tap it.
2. Select the desired pad bank. Use the Pad Bank Buttons or tap a pad bank shown on the left side of
the touchscreen.
3. To mute or unmute a pad’s sound, press it or tap it in the
touchscreen. Muted pads are lit red. Unmuted pads are lit yellow.
Unused pads do not show any sample names.
To Next Page
Loading...
