Akai MPC Touch User Manual

248
Program Mixer
The program mixer shows levels,
panning, mute states, send and insert
effects, and routing for all used tracks.
To view a specific setting on all
programs, tap the Level, Pan, Mute,
Send, Insert, or Route button on the
bottom edge of the touchscreen. You
can tap the Send or Insert buttons
multiple times to cycle through the four
available slots for each.
When a program is selected, you can view and adjust all of its settings in the left side of the touchscreen
rather than using the tab buttons at the bottom edge.
When viewing the program channel strip:
Note: This is the same as the program channel strip in Main Mode.
• The first field shows the current program number and name, which you can change.
• The second field shows where the program is routed, which you can change.
• The Inserts field shows any enabled or disabled effects for that program. Tap the pencil icon to
open a window where you can change and enable or disable the effects.
• To solo or mute the program, tap Solo or Mute (respectively).

Akai MPC Touch Specifications

General

Display type	LED
Built-in display	Yes
Product color	Black
USB direct playback	-
Built-in optical drive	No
Audio (L/R) in	2
Minimum RAM	4 GB
Minimum processor	Dual Core
Minimum processor speed	2.5 GHz
Minimum storage drive space	2048 MB
Mac operating systems supported	Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.9 Mavericks
Windows operating systems supported	Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 Pro, Windows 10 Pro x64, Windows 8