Akai MPC Touch - Phasers

279
Phasers
The phaser is a classic effect, created by multiple ganged all-pass filters to create “notches,” or sharp
spikes, in the frequency spectrum. The frequencies of these all-pass filters are usually modulated by an
LFO to create a sweeping sound.
Options: Phaser 1, Phaser 2, and Phaser Sync.
Phaser 1
Phaser 2
Phaser Sync
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 100
Rate 0–100 10
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 100
Rate 0–100 10
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 100
Rate 1 bar – 1/16 triplets 1/4