Akai MPC Touch - Chorus

276
Chorus
A chorus effect uses an LFO to modulate the pitch and a delay of the input signal, which are then added
to the dry signal. In small amounts, this creates the illusion of multiple voices playing at once. Turn up
the Feedback and Depth for more pronounced “shimmering” and “watery” sounds.
Options: Chorus 2-Voice and Chorus 4-Voice.
Chorus 2-Voice
Chorus 4-Voice
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 100
Delay 0–100 20
Amount 0–100 80
Width 0–100 80
Feedback 0–100 50
Rate 0–100 10
Parameter Value Range Default Value
Dry/Wet 0–100 (dry–wet) 100
Delay 0–100 20
Amount 0–100 80
Width 0–100 80
Feedback 0–100 50
Rate 0–100 10