241
Track Mute
This is useful if you want to hear a sequence without a particular track (e.g., muting your keyboard track
to focus on the bass) or if you want to isolate specific sounds or combinations of sounds that are
separated by track.
Tip: This function is similar to, but more convenient than, muting tracks one at a time in Track View.
Track Mute.
To mute tracks in this mode:
1. If the Track Mute tab in the lower-left corner is not already selected, tap it.
2. Select the desired pad bank. Use the Pad Bank Buttons or tap a pad bank shown on the left side of
the touchscreen.
3. To mute or unmute a track, press the corresponding pad or tap it in
the touchscreen. Pads for muted tracks are lit red. Pads for unmuted
tracks are lit yellow. Pads for unused tracks do not show any
information.
To Next Page
Loading...
